1-M542T-24HS39 CNC Stepper Motor Kit,Single Axis CNC Kit

This CNC kit included:

1 x Nema 24 Stepper Motor Drive 24-50VDC 1.5A-4.5A 256 Microstep M542T 1 x Dual Shaft Nema 24 Bipolar 4Nm (566 oz.in) 60x60x100mm 8 Wires

Motor Specification

Manufacturer Part Number: 24HS39-3008D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque(Bipolar): 4Nm(566oz.in) Holding Torque(Unipolar): 2.8Nm(397oz.in) Rated Current/phase(Bipolar Parallel): 4.24A Rated Current/phase(Bipolar Serial): 2.12A Rated Current/phase(Unipolar): 3A Phase Resistance(Bipolar Parallel): 0.7ohms Phase Resistance(Bipolar Serial): 2.8ohms Phase Resistance(Unipolar): 1.4ohms Inductance(Bipolar Parallel): 3mH ± 20%(1KHz) Inductance(Bipolar Serial): 12mH ± 20%(1KHz) Inductance(Unipolar): 3mH ± 20%(1KHz) Frame Size: 60 x 60mm Body Length: 100mm Shaft Diameter: Φ8mm Shaft Length: 24mm D-cut Length: 20mm Number of Leads: 4 Lead Length: 400mm Weight: 1.2kg

Connection

A+	A-	B+	B-
Black	Green	Red	Blue

 

Driver Specification

High performance, cost-effective Input Voltage: +24~50VDC (Typical 36VDC) Output Peak Current: 1.5~4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Short-voltage, over-voltage, over-current protections